Need help?Do you have a question about the Peavey Transtube Series Transformer 112 and is the answer not in the manual?
General| Type | Guitar Amplifier |
|---|---|
| Technology | TransTube |
| Speaker | 12 inch Blue Marvel speaker |
| Channels | 2 |
| Effects | Reverb |
| Output Power | 100 Watts |
| EQ | 3-band |
Details warnings about dangerous voltage, water exposure, and proper apparatus operation.
Lists the main capabilities and specifications of the Transformer amplifier.
Provides step-by-step instructions for connecting and powering the amplifier.
Explains the division of presets into factory/user groups and four banks (A, B, C, D).
Details the connection for the removable AC power cord and the main power switch.
Describes the High/Low Gain input jacks and the preset selection dial.
Explains the function of the User switch for preset selection and the Store switch for saving.
Details how to select amplifier models and lists their characteristics.
Explains the function of the Pre Gain knob for input level and distortion.
Describes the three-band EQ and Post Gain controls for tone shaping.
Details the Modulation Switch, Rate, and Depth controls for modulation effects.
Explains the Tap Tempo, Feedback, and Level controls for the delay effect.
Covers the global Master Level and T. Dynamics controls for overall output.
Describes the effects loop jacks and the headphone output for quiet practice.
Details the MIDI IN/OUT port and the remote footswitch DIN connector.
Illustrates wiring diagrams for mono, stereo, and external effects setups.
Explains the different operational modes of the PFC 4 footswitch.
Details how to select individual presets using the footswitch in Preset Mode.
Introduces the built-in tuner and how it transforms front panel LEDs.
Explains the footswitch's visual feedback for tuning and note accuracy.
Explains the hidden function to change the perceived speaker cabinet model.
Details a modulation effect that allows freezing the sweep at a specific point.
Reference chart detailing control functions in Patch, Global, and Tuner tweak modes.
Explains MIDI channel setup and using the MIDI Out as a thru connection.
Covers syncing presets with external devices and backing up preset data.
Details the hexadecimal addresses and names for all preset parameters.
Lists global settings and their corresponding hexadecimal offsets and ranges.
Visual diagram illustrating the signal path and digital processing within the amplifier.
Provides detailed technical data on power, frequency response, D/A conversion, and impedance.
Lists the physical measurements and weight of the amplifier.
Comprehensive safety instructions covering installation, operation, maintenance, and environmental considerations.
Outlines the warranty terms, what is covered, exclusions, and how to obtain service.
To Next Page