Peavey TKO 115 User Manual

Alerts to dangerous voltage and advises against opening the unit.

Emphasizes reading instructions and avoiding moisture/rain exposure.

High Gain, Low Gain, Pre Gain, and Post Gain controls for instrument connection and signal level.

Bright Switch, Low EQ, High EQ, and Graphic Equalizer for tonal adjustments.

Chorus/Effects Send, Effects Return, Preamp Out/Power Amp In jacks for external processing and routing.

Headphone jack for listening, Power LED, and Power Switch for operation.

Line cord retainers, ground switch, and line cord information.

Provides example tone settings for Rock, Funk, and Country genres based on playing styles.

Details on rated power, clipping, frequency response, and THD.

Input levels, impedances, and output levels for preamp and effects loop.

Specs for effects send/return, outputs, system noise, and equalization parameters.

Illustrates the signal flow within the amplifier unit, showing component connections.

Outlines one-year and 90-day limited warranties and exclusions.

Instructions for warranty registration and address changes.

Covers reading, ventilation, heat, power, and cord handling.

Addresses servicing, noise hazards, and hearing protection.