made with the LED illuminated. PRESET 3 (24) toggles between two reverb and delay
settings. As with effects settings, this switch may be used as an on/off for reverb and delay.
Both functions change simultaneously when this switch is depressed.
PRESET SELECT MODE
In this mode, all three switches control effects presets. Their corresponding LEDs indicate
which preset is active. Once desired settings are achieved utilizing the effects controls on the
front panel, double-click one of the Preset switches (14, 22, or 24) to store the settings.
To return to the last saved settings for a Preset, press the desired Preset switch once.
For a detailed explanation on creating and storing presets, refer to the TWEAK FEATURES
section of this manual on the following page.
8
To Next Page
Loading...
Need help?
General