Need help?Do you have a question about the Peavey TransTube Series and is the answer not in the manual?
Alerts users to electrical shock and fire risks from moisture and voltage.
Provides initial steps for operating the amplifier and getting started with play.
Highlights core features like amp models, effects, and presets.
Explains the division and relationship between factory and user presets.
Details AC power requirements and identifies rear panel components.
Explains input jacks, Preset Matrix Selector, and User Switch functions.
Details amp model selection and the Pre Gain control for input level.
Explains how to store presets and save changes.
Describes EQ, Post Gain for preset volume, and Modeling Reverb controls.
Details the Modulation Switch and controls for effects like Chorus, Flanger.
Adjusting delay time via Tap Tempo and controlling feedback and level.
Controls for overall volume and T. Dynamics power simulation.
Using effects loop and headphone jack for practice.
Connecting MIDI devices and the PFC 4 footswitch.
Connecting to outboard processors via MIDI.
Connecting for stereo speaker and external effects setups.
Selecting presets and banks using the PFC 4 footswitch.
Toggling between primary and secondary preset parameters.
Using the footswitch for guitar and chromatic tuning.
Using the built-in tuner and how front panel LEDs indicate status.
How the footswitch LEDs and buttons function in tuner mode.
Explains the differences and usage of guitar and chromatic tuning modes.
Changing speaker cabinet models for amp models.
Freezing modulation effects (Phaser/Flanger) at a specific point.
Detailed steps for using the Sweet Sweep Freeze feature.
How to tune the guitar a half step lower (Eb).
Achieving an extra gain boost using a single-button footswitch.
Explains the chart for tweaking modes and patch parameter details.
Settings for MIDI Channel, User on Powerup, Bank Select Style.
Settings for storing tuner tweaks, Eb mode, and tuner volume.
Setting the MIDI channel and using the MIDI Out as a Thru connection.
Synchronizing presets with external MIDI effects units.
Details on SysEx messages for programming and data transfer.
Table of MIDI commands and their resulting actions.
Defines Amp Model, Modulation Select, and Gain parameters.
Defines parameters for EQ, reverb, and delay settings.
Configuration for bank selection and PFC4 all info.
Settings for noise gate threshold, sensitivity, and tuner bits.
Visual representation of the signal path within the Transformer 112.
Visual representation of the signal path within the Transformer 212.
Details on power output, conversion, and control settings.
Specifications for effects loop and footswitch capabilities.
Essential safety guidelines for using electric products.
Information on noise exposure limits and hearing loss prevention.
Details what the warranty covers and how to obtain service.
States limitations on implied warranties and exclusion of damages.
To Next Page
General