Peavey TransTube Series - Transformer Globals Settings; Bank Select and PFC4 Info Settings; Noise Gate and Tuner Global Settings

Transformer
™
Globals
Offset (Hex) Name Range (Decimal)
00 <reserved> Reserved (keep at zero)
01 Bank Select Method 0 = Preset (1-4) stays the same after bank select (default)
1 = Preset goes to #1 after bank select
2 = Preset light blinks, waits for user preset selection
02 PFC4 All Info 0 = Inactive mode - LED’s off
1 = Inactive mode - LED’s dim (default)
2 = Inactive mode - LED’s bright for both modes
03 MIDI Channel (- 1) 0-15 for 1-16 (default = 0, channel 1)
04 Global Bits Bit 0 set for User patches at powerup (default = 0, factory)
Bit 1 set for Stereo mode (default = 0, mono)
Bits 2-7 are reserved (Keep at zero.)
05 Noise Gate Threshold 0=off, 1-25 (default = 5)
06 Noise Gate Sensitivity 0-25 (default = 5)
07 <reserved> Reserved (Keep at zero)
08 <reserved> Reserved (Keep at zero)
09 Tuner Bits Bit 0 set for E mode (default = 0, standard E mode)
Bit 1 set for Chromatic mode (default = 0, guitar mode)
Bits 2-7 are reserved (Keep at zero.)
0A Tuner Volume Level 0-25. Default is 13 (12:00). Zero is muted.
0B <reserved> Reserved (Keep at zero.)
0C <reserved> Reserved (Keep at zero.)
0D <reserved> Reserved (Keep at zero.)
30
All manuals and user guides at all-guides.com