Need help?Do you have a question about the Peavey VYPYR 60 TUBE and is the answer not in the manual?
Basic connection point for the instrument into the amplifier.
Selects pre-amplifier effects like distortion and boost pedals.
Selects amplifier models and channels (clean/overdrive).
Selects rack effects like delay, chorus, and reverb.
Controls the amount of gain and distortion for the amplifier.
Adjusts low EQ settings; in Edit mode, controls Parameter 2.
Adjusts mid EQ settings; in Edit mode, controls delay feedback.
Adjusts high EQ settings; in Edit mode, controls delay level.
Controls individual preset volume; in Edit mode, controls reverb amount.
Connect external audio devices like MP3 players or drum machines.
Controls the overall output volume of the amplifier.
Adjusts output power to achieve cranked sound at lower volumes.
Controls the amplifier's power on/off status.
Selects and saves amplifier presets and banks.
Sets the tempo for the delay effect.
Enables adjustment of alternate functions for encoders 4-8.
Provides a studio-quality output for headphones or recording.
Allows direct recording to a computer via USB.
Overdrive pedal for crunch tones or sustaining lead tones.
Booster effect that adds crunchy overdrive and warmth.
Classic 60s/70s fuzz tone, best with clean amp settings.
Warm analog chorus effect, adds depth and richness.
Compressor effect for controlling output level and sensitivity.
Effect that manipulates waveform frequencies for unique sounds.
Uses frequency filter sweeps to create a wah sound.
Time-based effect creating a swept comb-filter sound.
Monophonic Octave Generator, adds octave up/down signals.
Creates peaks and valleys in the audio signal's frequency spectrum.
Classic overdrive distortion with a mid boost.
Bright clean sound; hot-rodded clean with extra gain stage.
Vintage tweed with mid knob; hot-rodded with post-tone stack gain.
Classic rock tone; hot-rodded with extra gain and tone shaping.
British invasion sound; tone stack response limited on red channel.
Modern rock distortion with unique tone stack; hotter red channel.
Responsive gain, warm tone; revered by various players.
Ultimate tone machine; rip-roaring sound with active tone controls.
Wide EQ options and gain structures; crunch/ultra channels.
Go-to amp for rock/metal; raw tone, power, reliability.
High-gain amp with smooth distortion; unique tone characteristics.
Similar to Rec, unique characteristics due to 5881 tubes.
High-gain amp with a distinct low-end bump.
Produces a tone one octave below the note being played.
Eight-stage process creating a distinct phasing sound.
Simulates the sound of a rotating speaker using Doppler effect.
Plays back the input signal in reverse.
Changes the pitch of the played note; controllable via footswitch.
Emphasizes lower frequencies by using a longer delay line.
Creates a quick repetition of the original note.
Envelope Filter effect similar to Auto-Wah, with 'Q' adjustment.
Creates a wetter signal with a longer delay line, possible doubling effect.
Varies amplitude (volume) of the signal in rapid succession.
Records and plays back audio loops; requires optional footswitch.
Resets amplifier to factory defaults, erasing all stored presets.
Specific parameters for clean channels of amp models.
Specific parameters for overdrive channels of amp models.
Protects the unit from electrical surges; must be replaced with the same type.
Connects the amplifier to the AC mains power supply.
Connects an external speaker cabinet (Tube 60/120 only).
Connects Sanpera I/II foot controllers for power and operation.
Details coverage for material and workmanship defects in Peavey products.
Lists exclusions such as damage from misuse, accident, or unauthorized service.
Specifies that the warranty protects only the original purchaser.
Outlines warranty duration based on product category.
Explains Peavey's commitment to repair or replace defective products.
Provides instructions for obtaining warranty service from dealers or service centers.
Limits implied warranties to the duration of the express warranty.
Limits Peavey's liability for incidental or consequential damages.
To Next Page
General
