Peavey Ultra 60/120 User Manual

Controls the unit's power supply.

Allows amp to be placed in standby mode.

Indicates when AC power is supplied.

Indicates when amp is in standby.

Controls overall system volume.

Controls the echo effect level.

Active tone control for high frequencies.

Active tone control for mid frequencies.

Active tone control for low frequencies.

Controls the overall volume level of the channel.

Controls the input volume level of the channel.

Boosts crunch channel gain.

Boosts ultra channel gain.

Controls the overall volume level of the channel.

Controls the input volume level of the channel.

Passive tone controls for low, mid, and high frequencies.

Allows selection of Ultra or Clean channel.

Provides a preset boost to treble frequencies.

Controls the channel volume.

For instruments with extremely high outputs.

Used for most electric guitars.

Jacks for 4, 8, and 16 ohm speakers.

For connecting the remote footswitch.

Routes amplified signal to other equipment.

Input for returning signals from effects units.

Output for sending signals to effects units.

Three-position switch to minimize hum.

Power cord with grounding facilities.

General guidance on tone settings for different styles.

Illustrates the signal flow within the unit.

Detailed technical specifications for the Ultra 60 model.

Detailed technical specifications for the Ultra 120 model.

Further details on preamp inputs, outputs, effects, and EQ.

Warranty terms for the product, excluding specific parts.

Specific warranty for tubes and meters.

Factors that void the warranty and its limitations.

Instructions on how to get warranty service.

Instructions for completing and mailing the warranty registration card.

Essential safety guidelines for using electrical products.

Information on OSHA noise exposure limits and hearing protection.