To Next PageTo Next Page
Need help?Do you have a question about the Peavey CS 6000 and is the answer not in the manual?
General| Type | Power Amplifier |
|---|---|
| Number of Channels | 2 |
| 8 Ohms Per Channel | 300W |
| THD | < 0.1% |
| S/N Ratio | > 100dB |
| Input Sensitivity | 1.4V |
| Connectors Input | XLR and 1/4" TRS |
| Height | 3.5" (8.9 cm) |
| Width | 19" (48.3 cm) |
| Frequency Response | 20Hz - 20kHz |
| Input Impedance | 20k ohms balanced, 10k ohms unbalanced |
| Connectors Output | Binding posts and Speakon |
| Depth | 15.5 in |
Combines channels into a single powerful unit; use extreme caution due to high voltage.
Limits gain to prevent clipping, protecting speakers from damage.
Reduces output power if temperature exceeds limits; THERMAL PROTECT LED illuminates.
Reduces output to protect devices if an output is shorted.
Crowbar circuit engages to prevent loudspeaker damage from DC or subsonic voltage.
Observe speaker limits for power, frequency, and waveform to prevent damage.
Ensure amplifier peak power capability is not excessive for the speaker system.
Detailed power output specifications for various loads and frequencies.
Includes voltage swing, load impedance, frequency response, gain, and input impedance.
