Need help?Do you have a question about the Peavey CS 200X and is the answer not in the manual?
General| Damping Factor | > 200 at 8 ohms |
|---|---|
| Type | Solid State |
| Channels | 2 |
| Frequency Response | 20 Hz to 20 kHz |
| Total Harmonic Distortion | Less than 0.1% at rated power |
| Input Impedance | 20k ohms |
| Dimensions | 19" W x 3.5" H x 10.75" D |
| Speaker Outputs | Binding posts |
| Inputs | 1/4" TRS and XLR |
Essential safety warnings regarding voltage, servicing, and environmental exposure.
Details the power output, bridged configurations, and general capabilities of the amplifier.
Explains DDT LEDs, input sensitivity, power switch, and power indicator functionality.
Describes mode selection, ground lift switch, and balanced/unbalanced input jack usage.
Details the impedance selector switch and speaker output connections.
Explains the circuit breaker function and mains power source requirements.
Covers rack mounting, studio/home setup, bridge mode, and 70V/25V distribution systems.
Explains Peavey's patented DDT compression for preventing clipping and distortion.
Illustrates connection methods for stereo, mono, and bridge modes.
Details the one-year limited warranty, exclusions, and warranty registration process.
Covers safe usage, ventilation, power supply, cleaning, and service guidelines.
To Next Page
