Need help?Do you have a question about the Peavey VYPYR 15 and is the answer not in the manual?
General| Power Output | 15 Watts |
|---|---|
| Instrument Input | 1 x 1/4" |
| Auxiliary Input | 1 x 1/8" |
| USB | No |
| Number of Channels | 1 |
| Footswitch I/O | No |
| Amp Models | 12 |
| Effects | 11 editable post-amp 'rack' effects |
| Headphone Output | 1/4 inch |
| Speaker | 8 inch custom voiced modeling speaker |
| Height | 16.25 inch (41.3 cm) |
Welcome message, voltage check, and ventilation requirements for the amplifier.
Identifies input jack and first five control encoders (Stompboxes, Amp, Effects, Pre Gain, Low).
Details encoders for Low, Mid, High EQ, Post Gain, Aux Input, and Master Volume.
Explains Power Sponge, Power switch, and Bank/Preset selection.
Describes Edit Mode, Headphone/Record Out, and USB Record Out.
Explains the signal path order of encoders and general encoder functionality.
Details the amplifier's visual light show and how to disable it.
Introduces stompbox effects and provides an example usage scenario.
Details specific stompbox effects like XR Wild, Fuzz, Chorus, and Ring Modulator.
Explains selecting amp models and how EQ behaves across different models.
Details amp models like Twn, Dlx, Plxi, Brit, B-Kat, Classic, XXX, and JSX.
Details amp models like 6505, Rec, K-Stein, and DZL.
Introduces rack effects and how to select them.
Details specific rack effects like Octaver, Phaser, Chorus, and Looper.
Procedure to reset the amplifier to its original factory default settings.
Provides specific settings and details for GREEN and RED amp models.
Details the fuse holder and the AC mains power inlet.
Explains the external speaker output and the 8-pin MIDI connection.
Outlines what the warranty covers, what it doesn't, and limitations.
Details how to obtain warranty service and what Peavey will do.
Form for registering your product and providing feedback for Peavey.
To Next Page
