Need help?Do you have a question about the Peavey VYPYR PRO and is the answer not in the manual?
General| Speaker Configuration | 1x12" |
|---|---|
| Effects | Yes |
| Reverb | Yes |
| Amp Modeling | Yes |
| USB | Yes |
| Type | Modeling Amplifier |
| Inputs | Aux input |
| Outputs | Headphone out, XLR direct out |
| EQ | 3-band |
| Effects Count | 36 |
| Speaker | Custom voiced 12 inch speaker |
Covers reading, keeping, heeding, and following all instructions.
Covers installation, environment, grounding, plug safety, and liquids.
Covers using carts, servicing, rack mounting, unplugging, and noise hazard warnings.
Device compliance with FCC rules, conditions, and warnings.
Lists the main features and capabilities of the VYPYR PRO amplifier.
Basic steps for connecting, turning on, and initial operation.
Guide to selecting, adjusting, and editing amplifier models, presets, delay, and reverb.
Accessing and navigating the main edit menu for presets and settings.
Controls for instrument input, model selection, and parameter adjustment.
Master volume, LCD display, auxiliary inputs, and headphone jack.
Switches for powering the amplifier on/off and placing it in standby mode.
AC power inlet, speaker output, MSDI™ output, and speaker defeat.
Ports for MIDI, effects loop, and computer interaction.
Selecting, arranging, and editing models and their parameters.
Activating, adjusting, and configuring delay and reverb effects.
Loading, saving, renaming presets/banks, and assigning pedals.
Managing MIDI, demo mode, firmware, and input sensitivity.
Detailed settings for delay tempo, types, and reverb parameters.
Advanced configuration of noise gates, wah, boost, looper, presence, and volume.
Highlights the main features and capabilities of the Sanpera Pro footcontroller.
Description of rocker pedals and the booster switch.
Controls for tap tempo, looper, and model selection.
Buttons for navigating presets and engaging effects.
Connectors for footswitch control and MIDI output.
To Next Page
