Need help?Do you have a question about the Peavey Mark V M-3000 and is the answer not in the manual?
Overview of the M-3000 as a 300-watt monaural amplifier for various audio applications.
10-segment LED array showing output power at 2 ohms in 3 dB increments for easy status reading.
Two-position switch with an integral pilot light to indicate power supply status.
Patented circuitry that electronically senses clipping onset and activates compression to prevent distortion.
Visual LED indicating if compression is active (pushed in) or clipping occurs (pulled out).
Sets input sensitivity and includes a pull switch to defeat DDT compression circuitry.
Standard 1/4" phone jacks with a bridging function for flexible patching configurations.
Two 1/4" speaker output jacks wired in parallel, supporting a minimum 2-ohm load.
Features a 3-wire line (mains) cable with proper grounding facilities for safety.
Location and replacement instructions for the fuse, emphasizing using the correct type and rating.
List of key features including power, DDT compression, LED indicators, and input types.
Detailed technical specifications including rated power, frequency response, THD, and input impedance.
Important warnings and guidelines for safe operation, handling, and maintenance of the amplifier.
To Next Page
General
