Need help?Do you have a question about the Peavey Minx 110 and is the answer not in the manual?
General| Inputs | 1/4 inch input |
|---|---|
| Headphone Jack | Yes |
| Channels | 1 |
| Speaker | 10-inch |
| Controls | Volume |
| Type | Solid State |
| Dimensions | 16.5" H x 16.5" W x 9.5" D |
| EQ | 3-Band EQ (High, Mid, Low) |
Alerts users to dangerous voltage, shock risks, and conditions to avoid.
Describes the input jack and pre gain control for signal level.
Details the low, mid, and high passive tone controls for shaping sound.
Explains preamp out/power amp in and headphone out jacks.
Explanation of the power LED and power switch on the unit.
Description of back panel connections and cord retainers.
Details on rated power, clipping, frequency response, and distortion.
Specifications for preamp input/output, power amp input, and headphone output.
Information on system hum/noise levels and equalization type.
Recommended knob settings for achieving a rock tone.
Recommended knob settings for slap and pop playing styles.
Recommended knob settings for R&B and Country music.
Details on the one-year and 90-day limited warranties.
Conditions, exclusions, and limitations affecting warranty validity.
Procedure for getting warranty service, including proof of purchase.
Steps for completing and mailing the warranty registration card.
Essential safety guidelines for using the amplifier correctly.
Information on safe sound levels and the need for hearing protection.
To Next Page
