Need help?Do you have a question about the Peavey MicroBass and is the answer not in the manual?
General| Type | Bass Amplifier |
|---|---|
| Power Output | 20 Watts |
| Speaker Size | 8 inches |
| Channels | 1 |
| Inputs | 1 x 1/4" Instrument Input |
| EQ | 3-band EQ |
| Outputs | 1 x 1/4" Headphone |
| Tone Controls | Bass, Treble |
The input jack accepts signals from guitar pickups. Use a high-quality shielded cable.
Controls the overall volume level of the system.
Passive tone controls that regulate low, mid, and high frequencies.
Stereo jack allowing signal to both sides of any stereo headset. Internal speaker turns off when headphones are connected.
Depress the switch to 'On'. Green power LED illuminates indicating power is supplied.
Illuminates green when AC power is being supplied to the amp.
Features a 3-wire line cord with proper grounding facilities. Do not remove the ground pin.
Details rated power, clipping power, frequency response, distortion, dynamic range, hum, noise, consumption, dimensions, and weight.
Details preamp input, headphone output, system hum, noise, and equalization specifications.
Covers product defects for one year, and tubes/meters for 90 days from purchase.
Details conditions that void the warranty, exclusions, and what Peavey will do to repair defects.
Provides instructions on how to obtain warranty service and the importance of registration.
Covers general usage, placement, ventilation, heat sources, power supply, and cord handling precautions.
Details when to seek professional service and warnings about user servicing.
Warns about potential hearing loss from high noise levels and recommends ear protection.
To Next Page
