Need help?Do you have a question about the Peavey Monitor 300 Series and is the answer not in the manual?
Identifies the product as the 300 Series Monitor Equalizer/Power Amplifier.
Presents critical safety warnings regarding electrical shock and product operation.
Controls the overall input gain, offering a wide dynamic range for various signal levels.
Parallel 1/4" jacks providing access to level control and routing signal to the equalizer.
Variable high-pass filter for bass frequency roll-off, adjustable from 20 Hz to 200 Hz.
Parallel jacks for taking line-level signals after the equalizer for external use.
Provides 15 dB equalization at each of the nine center frequencies for tone control.
Details the 3-wire line cord for safety and proper grounding facilities.
Explains the power switch operation and the function of the red pilot light (LED).
Connects external speakers with a minimum impedance of 4 ohms.
Features for storing the mains cable for travel and maintenance.
Provides instructions for fuse replacement and safety precautions.
Details key technical parameters like power output, frequency response, and distortion.
Warns about potential permanent hearing loss from high noise levels and OSHA exposure limits.
Lists general cautions for safe and effective operation, including maintenance and placement.
Outlines the one-year warranty for materials and workmanship, excluding certain components.
Specifies a 90-day warranty period for tubes and meters included in the product.
Details the terms, exclusions, and limitations that apply to the product warranties.
Provides steps for completing and mailing the warranty registration card for service.
To Next Page
General
