Need help?Do you have a question about the Peavey KB 300 and is the answer not in the manual?
General| Type | Keyboard Amplifier |
|---|---|
| Channels | 3 |
| Effects | Reverb |
| Speaker | 15-inch |
| Weight | 68 lbs |
| Equalizer | 3-band EQ (Low, Mid, High) |
Alerts users to dangerous voltage and advises servicing by qualified personnel.
Details Low Z (XLR) and High Z (1/4") inputs for channel 1.
Controls for volume, Low EQ, Mid EQ, High EQ, and Reverb for channel 1.
Stereo jack for connecting external effects devices pre-EQ.
Details inputs, volume, EQ, and reverb for channels 2 and 3.
Controls for overall effects and master volume.
Descriptions of Power LED, Ground Switch, and Power Switch.
Jacks for in-line patching of effects or routing signal to other devices.
Outputs for sending signal to consoles/recorders.
For connecting an optional footswitch to control reverb.
Technical specifications for the power amplifier output stage.
Technical specifications for the preamplifier and its inputs/outputs.
Illustrates front panel connections for inputs and effects.
Illustrates back panel connections for rack effects, mixer, and tape deck.
Covers defects in material and workmanship for one year, excluding specific components.
Details exclusions, voiding conditions, and limitations of the warranty.
Steps for obtaining warranty service and required documentation.
Covers safe usage, placement, ventilation, and power connection guidelines.
Information on OSHA noise exposure limits and the need for hearing protection.
To Next Page
