Need help?Do you have a question about the Peavey Combo 300 and is the answer not in the manual?
General| Power Output | 300 Watts |
|---|---|
| Equalization | 9-band graphic EQ |
| Effects Loop | Yes |
| Speaker | 15-inch |
| Type | Solid State |
| Channels | 1 |
| Outputs | Speaker out |
Describes the function and operation of the unit's power switch and associated LED indicator.
Explains the three-position ground switch for noise minimization and advises against removing the ground pin.
Details the patented DDT (Distortion Detection Technique) compression circuit and its LED indicator.
Explains the two effects loops (Patch and Preamp Out/Power Amp In) for external devices and signal routing.
Describes the built-in variable crossover for biamping and suggests frequency points and configurations.
Introduces the eight EQ controls for shaping tone, divided into high and low frequency sections.
Details the four high-frequency EQ controls (clarity, bright, presence, edge) and their tonal effects.
Explains the four low-frequency EQ controls (bottom, punch, body, timbre) and their impact on bass tone.
Explains the Post Gain and Pre Gain controls, including their integral pull switches for added effects.
Describes the High Gain and Low Gain inputs, their sensitivity, and how they handle different pickup levels.
Details the external speaker jack, internal speaker wiring, and power output based on impedance.
Provides example tone settings for Rock, Funk, and Country styles to guide user adjustments.
Lists detailed technical specifications including power ratings, frequency response, and distortion levels.
Includes critical safety information regarding hearing protection and general product usage cautions.
Outlines the one-year limited warranty on materials and workmanship, excluding specific parts.
Provides instructions for completing and mailing the warranty registration card for service.
Details limitations on Peavey's liability for damages, lost profits, and consequential damages.
To Next Page
