Need help?Do you have a question about the Peavey KB 100 and is the answer not in the manual?
General| Type | Keyboard Amplifier |
|---|---|
| Power Output | 100 Watts |
| Speakers | 1 x 15" |
| Channels | 3 |
| Equalization | 3-band EQ |
| Weight | 45 lbs |
| Number of Channels | 3 |
| Power | 100 Watts |
| Inputs | 1 x XLR |
| Speaker | 15 inch |
Describes LOW Z, HIGH Z inputs and their associated level controls for channels 1, 2, and 3.
Covers PRE EQ PATCH, MASTER EFFECTS, and all four EQ controls (LOW, LOW/MID, HIGH/MID, HIGH).
Details the POWER LED and the GROUND SWITCH for managing hum and noise.
Explains the POWER SWITCH operation and safety for the LINE CORD.
Details HEADPHONE OUT, PREAMP OUT/POWER AMP IN jacks for audio routing and effects.
Describes the function of the REMOTE SWITCH for controlling reverb via footswitch.
Details rated power, clipping points, frequency response, and total harmonic distortion.
Lists impedance, levels, and response for various inputs, outputs, and the preamp section.
Covers system distortion, preamp hum/noise, and master equalization characteristics.
Outlines the 1-year and 90-day limited warranties, conditions, exclusions, and limitations.
Provides instructions for warranty registration, obtaining service, and contacting Peavey.
Covers safe placement, ventilation, power connection, cord handling, and cleaning.
Advises on service by qualified technicians, proper use with carts, and hearing protection.
To Next Page
