Peavey PA 100

Warning to prevent electrical shock or fire hazard by avoiding exposure to rain or moisture.

Varies preamp gain, offering lowest noise and maximum performance.

Controls low frequency response, acting as a volume control for boost/cut.

Controls high frequency response, acting as a volume control for boost/cut.

Blends delayed signal into master mixer; must be turned up for effect.

Controls overall system level using variable negative feedback.

Provides method for reverb cutoff by use of optional remote footswitch.

Indicates when power is applied to the amplifier.

For protection and grounding; do not remove the ground pin.

Located within chassis; replace with proper value to avoid damage.

Three-position switch for power control and proper grounding.

For 16 Ohm speaker; system designed for 8 Ohm total load.

Conveniently store the AC line cord during transport.

Caution to prevent electrical shock; no user serviceable parts inside.