Need help?Do you have a question about the Peavey PV 260 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Minimum Impedance | 2 ohms |
| Signal to Noise Ratio | > 100 dB |
| THD | < 0.1% |
| Input Impedance | 10 kΩ |
Covers warnings for electric shock, opening the unit, and environmental exposure.
Indicates DDT compression or clip status during amplifier operation.
Illuminates when AC power is supplied to the amplifier.
Allows the user to turn the amplifier on or off.
Protects the power transformer from overheating due to faults or overload.
Details line cord grounding and speaker output connections with impedance.
Covers DDT compression, input sensitivity, and channel input modes for stereo/mono.
Details output power, THD, slew rate, frequency response, damping factor, hum, and noise.
Covers input sensitivity, impedance, and power consumption details.
Lists the physical dimensions and weight of the amplifier unit.
Illustrates how to connect inputs and speakers for stereo mode.
Shows input and speaker connections for dual-channel mono operation.
Guide to finding information on other Peavey products through dealers.
Provides 18 detailed instructions on product usage, care, and servicing.
Details permissible noise exposure levels and recommends hearing protection.
To Next Page
