Need help?Do you have a question about the Peavey PV 1500 and is the answer not in the manual?
Details on permissible noise exposure levels according to OSHA and hearing protection guidelines.
Overview of the PV Series amplifier and instructions for safe unpacking.
Guidance on rack mounting, connecting speakers, and initial power-up procedures.
Explanation of input gain, signal activity, and DDT™ active LEDs for channel status.
Description of the power switch operation and the function of the circuit breaker.
Details on the IEC mains connector and the binding post speaker outputs.
Details on Speakon connectors and the stereo/bridge mode selection switch.
Explanation of DDT circuitry, its switch, and the amplifier's cooling fan.
Details on barrier strip and combo input connectors for signal input.
Description of the LOW CUT filter switch and its function to prevent over-excursion.
Explanation of the 150 Hz crossover, its activation, and THRU/LOW and HIGH OUT jacks.
Guidelines for rack mounting PV amplifiers in commercial and industrial environments.
Detailed explanation of how to use the amplifier in bridge mode and its applications.
In-depth explanation of Peavey's patented DDT compression system and its benefits.
Diagram and explanation for connecting speakers in a basic stereo configuration.
Diagram and explanation for setting up a mono bi-amped system.
Diagram and explanation for operating the amplifier in parallel mono mode.
Diagram for connecting speakers in a stereo bi-amped configuration.
Diagram for connecting speakers in bridge mode.
Details on power output ratings for stereo and bridge modes across different impedances.
Specifications for harmonic distortion (THD) and frequency response across models.
Overview of the amplifier's feature set, topology, and physical characteristics.
Detailed output power ratings, including 2-ohm, and distortion specifications.
Specifications for input sensitivity, impedance, and power consumption.
Details on what the warranty covers, what it does not cover, and limitations on implied warranties.
Procedure for obtaining warranty service, including shipping and claims process.
Information on limitations of liability for damages, both implied and consequential.
To Next Page
General
