Need help?Do you have a question about the Peavey PA600 and is the answer not in the manual?
Controls the gain of each input channel by varying negative feedback for optimal performance.
Adjusts tonal balance by boosting or cutting high and low frequencies for each input channel.
Sets the signal level sent to the monitor mix bus from each channel for stage monitoring.
Blends signal to internal reverb or external effects units from each channel.
Sets the overall gain for the console's main mixing system, controlling main output level.
Controls the level of the monitor output line amplifier, affecting stage monitoring volume.
Features master equalizers and three overlapping sweep anti-feedback filters for tone and feedback control.
Varies input levels mixed into main and monitor busses from external input jacks.
Adjusts reverb return gain, signal drive strength, and tonality for effects.
Master gain control for the effects bus, determining signal level at the effects output jack.
Sub-level control for the line output jack, useful for patching to house or second monitor systems.
Allows selective monitoring of main or monitor mixing busses via the headphone output.
Two meters with adjustable controls to monitor output levels and indicate overload.
Details high and low impedance microphone inputs for each channel.
Describes main output, line output, and monitor output signal characteristics.
Details effects output and auxiliary inputs for patching external signals.
Provides a method for patching internal power amplifier into other console send busses.
Guidance on connecting and using external echo or effects units with the console.
To Next Page
General
