Peavey PV 900 User Manual

PV
®
Series Amps Operation Manual
For more information on other great Peavey products, go to your local Peavey dealer or online at www.peavey.com.

Peavey PV 900 Specifications

General

Power Output	900W
Channels	2
Weight	28 lbs
Minimum Impedance	2 ohms
Signal to Noise Ratio	> 100 dB
Input Connectors	XLR and 1/4" TRS
Frequency Response	20 Hz - 20 kHz
Input Impedance	20 kOhms
Power (2 ohms)	900 Watts
Output Connectors	Binding posts and Speakon

Summary

Specifications

Rated Output Power

Output power ratings for stereo and bridge modes across different impedance loads.

Hum & Noise

Signal-to-noise ratio for stereo mode below rated output power at 4 ohms.

Distortion

Measures SMPTE-IM and THD distortion under various operating conditions.

Input Sensitivity & Impedance

Details input voltage requirements and impedance for balanced connections.

Frequency Response

Specifies the audio frequency range for stereo mode at different power levels.

Damping Factor

Measures the amplifier's control over speaker cone movement at 8 ohms.

Power Consumption

Indicates the current draw for stereo mode at 1/8 rated output power.

Topology

States the amplifier's internal circuit design class.

Weight

Provides the physical weight of each amplifier model.

Feature Set

Lists key features including DDT compression, cooling, filters, inputs, outputs, and protection.