Need help?Do you have a question about the Peavey PV 500 and is the answer not in the manual?
Indicates DDT compression activity or channel clipping for system protection.
Illuminates when AC power is supplied and both channels are operational.
Heavy-duty rocker switch used to turn the power amplifier on or off.
Protects the power transformer from overheating and destruction due to fault conditions.
Enables or defeats the DDT compression circuit to minimize clipping or overload.
Selects between Stereo or Bridge mode of operation for the amplifier.
Adjusts input gain for each channel, determining output level for a given input signal.
Parallel 1/4" jacks for conventional input or line-out, offering quasi-balanced capability.
Provides 1/4" jacks and 5-way binding post terminals for speaker connection.
Details the 3-conductor line cord and grounding requirements for 120V products.
Covers general installation advice for commercial, studio, and home environments.
Guidelines for rack-mounting, cooling, and preventing thermal shutdowns.
Recommendations for placement and cooling in non-commercial environments.
Explains how to convert the stereo amplifier into a single-channel unit for higher power.
Details the patented system that prevents clipping and maximizes performance.
To Next Page
General
