Need help?Do you have a question about the Peavey PV 1 and is the answer not in the manual?
Congratulations! You have just purchased one of the world's finest professional power amplifiers.
Inspect the amplifier during unpacking. Be sure to save the carton. Mount in a standard 19" rack.
Set line voltage selector, rack mount, connect speakers, turn on power.
Gain controls, PWR, SIG, DDT, and Thermal Protect LEDs for each channel.
Rocker-type power switch and dual primary fuse description.
IEC connector, AC mains cord, and line voltage selector switch.
Shockproof binding posts and twist lock connectors for speaker output.
Switches to select STEREO/BRIDGE mode and enable/disable DDT compression.
Barrier strip, combo XLR/TRS jack, 40 Hz filter, and 150 Hz crossover switches.
1/4" jacks for patching signals for crossover or thru functionality.
Converts the 2-channel amp into a single, higher-power unit.
DDT limiter and 2-stage overcurrent protection for speaker and amp safety.
Rated output power, input sensitivity, and impedance details.
THD, frequency response range, and damping factor.
Power consumption, topology, weight, and dimensions.
Summary of features like DDT, cooling, filters, inputs, outputs, and protection.
Diagram and description for a standard stereo setup with full-range speakers.
Diagram and description for bi-amping with separate full-range and subwoofer speakers.
Diagram and description for using both channels in mono for increased power.
Diagram and description for bridging the amp for maximum mono output.
To Next Page
General
