Peavey PV 260 - Technical Specifications; Performance Specifications; Operational Specifications; Physical Specifications

PV™ 260 SPECIFICATIONS
Output Power:
4 ohms, 1 kHz at 1% THD: 130 W RMS
8 ohms, 1 kHz at 1% THD: 100 W RMS
2 ohms not recommended
Rated Output Power:
4 ohms, 20 Hz to 20 kHz, 0.1% THD:
100 W RMS
8 ohms, 20 Hz to 20 kHz, 0.1% THD:
90 W RMS
Slew Rate:
Stereo mode, each channel: 20 volts/uSec
Total Harmonic Distortion:
20 Hz to 20 kHz @ rated power, 8 ohms:
Less than 0.1%
Input Sensitivity and Impedance:
(@ rated output power)
4 ohms: 1.0 V RMS, 0 dBV;
20 k ohms (26 dB)
Frequency Response:
+0, -1 dB, 20 Hz to 30 kHz, 1 W RMS,
8 ohms
Damping Factor:
8 ohms, 1 kHz: Greater than 200
Hum and Noise:
(below rated output power)
8 ohms, 100 dB, unweighted
Power Consumption:
(@ rated output power)
Domestic: 600 watts, 60 Hz, 120 V AC
Export: 600 watts, 50/60 Hz, 230 V AC
Dimensions and Weight:
Height: 3.5"
Width: 19"
Depth: 9.6"
Weight: 15.6 lbs.
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
5