Need help?Do you have a question about the Peavey MP-4 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Equalization | 3-band EQ per channel |
| Impedance | 4 ohms |
| Inputs | XLR |
| Frequency Response | 20 Hz to 20 kHz |
| Outputs | Speaker outputs |
Introduces the MP-4's market position and design approach, focusing on simplicity and performance.
Details variable feedback, high impedance, low noise, and good dynamic range for input signals.
Mentions two independent mixing systems and active three-band equalization for tonal flexibility.
Advises against exposing the appliance to rain or moisture to prevent electrical shock or fire hazards.
Describes high impedance inputs and the function of channel gain for signal level adjustment.
Explains frequency shaping via contour and post-send effects routing for each channel.
Details the main system loudness control and the reverb return amplifier gain.
Explains low, middle, and high frequency adjustment capabilities for overall tonal balance.
Describes auxiliary input, line outputs, and patch panel functions for external interfacing.
Explains the function and importance of the rear panel fuse and power switch.
Details speaker output jacks and load impedance recommendations for optimal performance.
Lists key performance metrics including power, distortion, and frequency response.
Outlines permissible daily noise exposure durations and levels as specified by OSHA.
Recommends wearing hearing protectors to prevent potential hearing loss from high sound pressure levels.
To Next Page
