Need help?Do you have a question about the Peavey Mace and is the answer not in the manual?
General| Preamp Tubes | 4 x 12AX7 |
|---|---|
| Power Tubes | 4 x 6L6GC |
| Channels | 2 |
| Reverb | Yes |
| Inputs | 2 |
| Type | Tube Amplifier |
| EQ | 3-band (Bass, Mid, Treble) |
| Controls | Bass, Mid, Treble, Presence, Reverb |
| Speaker Configuration | 4 x 12" speakers |
Rated power and power versus load at various impedances and THD levels.
Peak output ratings and music power output at rated load.
Input sensitivity, impedance, and noise levels for the preamp section.
Specs for distortion, frequency response, bass, treble, and middle controls.
Description of reverb and tremolo control functions and operation.
Explanation of the four inputs for effects, normal, parallel, and series channels.
Details on the selector, combiner, reverb, and tremolo buttons on the footswitch.
Functions of pre gain, treble, bass, and middle controls for channel tone shaping.
Usage of post gain for overdrive and explanation of reverb and tremolo depth/rate.
Information on the pilot light, fuse location, and pilot light function.
Explanation of the three-position line power switch and grounding safety.
Function of the standby switch and details on main and external speaker jacks.
Location and connection details for the Automix footswitch socket.
Critical warning about operating the amplifier without a speaker load.
Guidelines for handling 6L6GC tubes, including index pins and proper socketing.
To Next Page
