Need help?Do you have a question about the Peavey Mark VIII Series Bass and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| EQ | 9-band graphic EQ |
| Effects Loop | Yes |
| Speaker Configuration | Head only (no speakers) |
| Type | Bass Amplifier |
Describes High Gain and Low Gain inputs for instrument connection.
Controls for input level, sustain function, and master amplifier volume.
Switches for midbass boost (Punch), sustain activation, and treble boost (Bright).
Controls for low, high, and graphic equalization adjustments.
Controls for chorus activation, rate, and depth.
Controls crossover frequency, balance, and effects send/return.
Jacks for external effects, mixing consoles, and remote footswitch.
Outputs for low and high frequency signals post-crossover.
DDT compression switch, circuit explanation, and power indicator LED.
Power switch, ground switch, and fuse protection.
Details power ratings, THD, frequency response, and DDT range.
Specifies input/output levels, impedance, and EQ ranges.
Details controls for chorus, sustain, and remote switch.
Covers effects loop, line patch, and balanced line output specs.
Suggested EQ and control settings for a rock sound.
Suggested EQ and control settings for a funk sound.
Suggested EQ and control settings for a country sound.
Diagram showing instrument input, effects pedal, and remote footswitch connections.
Diagram illustrating connection of low and high-range outputs for bi-amping.
Details one-year limited warranty for product, 90-day for tubes/meters.
Lists conditions voiding warranty, exclusions, and liability limitations.
Instructions for obtaining service and registering the product.
To Next Page
