Need help?Do you have a question about the Peavey Vypyr VIP 3 and is the answer not in the manual?
Select instrument type and access presets. Save changes by holding the bank button.
Select pre-amplifier effects or instrument models and enter Edit mode.
Select amp model and channel. Enter tuner mode by holding for 2 seconds.
Adjust Pre Gain, Low, Mid, High EQ, and Post Gain for tone shaping.
Control overall output volume and monitor looper status. Requires Sanpera.
Access alternate functions and set delay tempo. Enter Edit mode to adjust parameters.
Connect to computer for recording/updates or use for studio-quality headphones.
Connect external audio devices like MP3 players or drum machines.
Select instrument type and access presets. Save changes by holding the bank button.
Select instrument models or stompbox effects. Enter Edit mode to adjust parameters.
Select amp models and Rack effects. Enter tuner or Edit mode as needed.
Adjust Pre Gain, Low, Mid, High EQ for tone shaping.
Adjust High EQ, Post Gain for preset volume, and Master Volume.
Indicates looper status. Requires Sanpera foot controller for operation.
Access alternate functions and set delay tempo. Enter Edit mode to adjust parameters.
Connect to computer for recording/updates or use for studio-quality headphones.
Connect external audio devices like MP3 players or drum machines.
Scroll through and select user-definable presets. Bank C for acoustic, Bank D for bass.
Select instrument or effect. Enter Edit mode to adjust parameters.
Select amp model and channel. Enter tuner mode by holding for 2 seconds.
Select "Rack" effects. Enter Edit mode to adjust effect parameters.
Adjust Pre Gain, Low, Mid EQ for tone shaping.
Adjust High EQ, Post Gain for preset volume, and Master Volume.
Control power output and monitor looper status. Requires Sanpera.
Accesses alternate control functions for Stompbox/Effect parameters.
Set delay tempo and connect to computer for recording/updates.
Connect external audio devices or use for studio-quality headphones.
Press and hold the tuner button to access the System Menu options.
Use encoders to adjust contrast and save changes or exit without saving.
Selects instrument models or stompbox effects. Enter Edit mode to adjust parameters.
Connect Sanpera foot controllers here. Provides power to the controllers.
Rocker switch for powering the unit on/off. Caution about hazardous energy.
IEC receptacle for connecting the AC line cord. Ensure correct line voltage.
Rated power, load, power consumption, dimensions, and weight for VIP 1.
Rated power, load, power consumption, dimensions, and weight for VIP 2.
Rated power, load, power consumption, dimensions, and weight for VIP 3.
Defines what is covered by the Peavey warranty for material and workmanship.
Lists conditions and damages not covered by the Peavey warranty.
Clarifies that the warranty protects only the original purchaser of the product.
Details the duration of the warranty for various product categories.
Explains Peavey's commitment to repair or replace products covered by warranty.
Provides instructions for getting warranty service via dealer or direct shipment.
To Next Page
General
