Peavey Vypyr VIP 3


33
111 1 112 2 113 3 114 4 1155
4 4 5 5 776 6 8 8 99
aux inaux inUUSSBB pphhoonneess
00
77
88
11
22
33
44
55
66
1010
1111
99
1212
1313
mastermaster
volumevolume
VIP-1VIP-1
PP11 PP22 ddeellaay y ffeeeeddbbaacckk ddeellaay y lleevveell rreevveerrb b lleevveell
edit modeedit mode
tap tempotap tempo

pprree--ggaaiinn llooww mmiidd hhiigghh ppoosstt--ggaaiinn
VYPYRVYPYR
®®
ampS ENCODErampS ENCODEr
Turn this knob to select your amp model. Turn this knob to select your amp model. Each amp has 3 channels: if the LED is red, you are on the highEach amp has 3 channels: if the LED is red, you are on the high
gain channel, yellow for medium gain and green for low gain. gain channel, yellow for medium gain and green for low gain. When you are using an acoustic When you are using an acoustic preset (Item 1,preset (Item 1,
Bank C) only the acoustic amplifiers will be available. Bank C) only the acoustic amplifiers will be available. If you are using a bass If you are using a bass preset (Item 1, Bank D) only thepreset (Item 1, Bank D) only the
bass amplifiers will be available.bass amplifiers will be available.
TUNER MODE: Press and hold for 2 seconds to enter tuner mode. The LEDs around the Amp encoder willTUNER MODE: Press and hold for 2 seconds to enter tuner mode. The LEDs around the Amp encoder will
tell you what note you are tuning. tell you what note you are tuning. At the same time, the LEDs around the StAt the same time, the LEDs around the Stompbox encoder (Item 2) willompbox encoder (Item 2) will
indicate whether the note is sharp or flat. indicate whether the note is sharp or flat. If the LED is to the right of the 12:00 position you are sharp (TuneIf the LED is to the right of the 12:00 position you are sharp (Tune
down). down). If the LED is to the left of the If the LED is to the left of the 12:00 position you are flat (tune up). 12:00 position you are flat (tune up). When all of the LEDs around theWhen all of the LEDs around the
Effects encoder come on, you are in tune.Effects encoder come on, you are in tune.
prE GaINprE GaIN
Turn this knob to crank up the gainTurn this knob to crank up the gain—think of it as how much distortion you want out of the amplifier. In Edit—think of it as how much distortion you want out of the amplifier. In Edit
mode this knob controls parameter 1 of either the selected Stompbox or Effect.mode this knob controls parameter 1 of either the selected Stompbox or Effect.
NOtE: NOtE: this conol s e low on he acosthis conol s e low on he acosic nd bss eses o llow fo clen ndisoed sonds.ic nd bss eses o llow fo clen ndisoed sonds.
LOW ENCODErLOW ENCODEr
Low EQ adjustment. Low EQ adjustment. In edit mode this In edit mode this knob controls parameter 2 knob controls parameter 2 of either the selected Sof either the selected Stompbox or Effect.tompbox or Effect.
mID ENCODErmID ENCODEr
Mid EQ adjustment. Mid EQ adjustment. In edit mode this In edit mode this knob controls the Fknob controls the Feedback of the Delay effect. eedback of the Delay effect. Feedback is theFeedback is the
number of times the delay repeats.number of times the delay repeats.
HIGH ENCODErHIGH ENCODEr
High EQ adjustment. High EQ adjustment. In edit mode this In edit mode this knob controls the Lknob controls the Level or amount of Devel or amount of Delay effect. elay effect. All the way to All the way to thethe
left is zero and all the way to the right is max.left is zero and all the way to the right is max.
pOSt GaINpOSt GaIN
This is the individual preset volume. In edit mode this knob controls the amount of Reverb.This is the individual preset volume. In edit mode this knob controls the amount of Reverb.
44
55
66
77
88