VI
VIp p 3 p3 peesesess
SaVING aND rENamING prESEtSSaVING aND rENamING prESEtS
1. 1. TTo save a preset you have edited, first press and hold the Preset Encoder for 2 seconds, then releao save a preset you have edited, first press and hold the Preset Encoder for 2 seconds, then release.se.
The screen will now look like Fig 1. The screen will now look like Fig 1. You cYou can now rename and save your preset.an now rename and save your preset.
2. 2. In this In this mode, the bottom row mode, the bottom row on the display on the display scrolls through different cscrolls through different commands. ommands. In this In this example, theexample, the
display reads “Turn Stomp=NEXT BANK” meaning that the inst/stomp encoder is used to quickly scrolldisplay reads “Turn Stomp=NEXT BANK” meaning that the inst/stomp encoder is used to quickly scroll
through the banks allowing you to choose the desired bank in which to save the current preset (See Fig. 2).through the banks allowing you to choose the desired bank in which to save the current preset (See Fig. 2).
3. The amplifiers and effects encoders are used to 3. The amplifiers and effects encoders are used to rename the preset. rename the preset. Use the amplifiers encoder to moveUse the amplifiers encoder to move
the cursor and use the effect encoder to change the chosen character (See Fig 3 and Fig 4).the cursor and use the effect encoder to change the chosen character (See Fig 3 and Fig 4).
To save the preset, simply press the PRESET ENCODER.To save the preset, simply press the PRESET ENCODER.
NOtE: NOtE: a n ie ding sa n ie ding sve ode ess he tve ode ess he tap tEmpO on o cncel o of sve odeap tEmpO on o cncel o of sve ode
nd en o nol l.nd en o nol l.
Fig 1Fig 1
Fig 2Fig 2
Fig 3Fig 3
Fig 4Fig 4
To Next Page
Loading...
