Peavey Vypyr VIP 3


SyStEm mENu COmmaNDSSyStEm mENu COmmaNDS
1. 1. TTo access the System Menu, press and hold the tuner button (Fig 5). The screen will display 3 choiceso access the System Menu, press and hold the tuner button (Fig 5). The screen will display 3 choices
in this menu: ADJUST CONTRAST (for changing the contrast of the display), DISABLE DEMO MODE (turnsin this menu: ADJUST CONTRAST (for changing the contrast of the display), DISABLE DEMO MODE (turns
off the “light show”) and FACTORY RESET (erases all user defined presets and returns the amp to originaloff the “light show”) and FACTORY RESET (erases all user defined presets and returns the amp to original
factory presets. factory presets. TTo disable DEMO MODE, use o disable DEMO MODE, use the inst/stomp encoder to scthe inst/stomp encoder to scroll until the display rroll until the display readseads
DISABLE DEMO MODE and press the amplifiers encoder to select.DISABLE DEMO MODE and press the amplifiers encoder to select.
ImpOrtaNt, aLtHOuGH tHE SyStEm mENu WILL prOmpt yOu tO SELECt yES Or NO WHENImpOrtaNt, aLtHOuGH tHE SyStEm mENu WILL prOmpt yOu tO SELECt yES Or NO WHEN
pErFOrmING a FaCtOry rESEt, DO NOt CLICK "yES" uNtIL yOu arE CErtaIN, bECauSE tHE FaCtOrypErFOrmING a FaCtOry rESEt, DO NOt CLICK "yES" uNtIL yOu arE CErtaIN, bECauSE tHE FaCtOry
rESEt IS IrrEVErSIbLErESEt IS IrrEVErSIbLE
2. 2. TTo adjust the contrast, press the amplifier encoder, then use the inst/stomp encoder (Fig 6) to adjusto adjust the contrast, press the amplifier encoder, then use the inst/stomp encoder (Fig 6) to adjust
the contrast. the contrast. Then, press the amplifiers encoder to save your cThen, press the amplifiers encoder to save your changes or the effects encoder to exithanges or the effects encoder to exit
without saving without saving changes changes (Fig 7).(Fig 7).
Fig 5Fig 5
Fig 6Fig 6
Fig 7Fig 7