10
Link
Delay
Crossover (X-Over)
Many times, in particular for stereo signals, you may want to make the same adjust to two or more channels at
the same time. Using the link function, inputs can be linked to other inputs and outputs can be linked to other
outputs. e check marks on the above screen indicate linkage. When channels are linked, the edit buttons for
those channels will blink simultaneously when editing.
Up to 680 milli-Seconds of delay can be added to any input or output. e delay resolution is 1 sample or 10.4
micro-Seconds.
Although the button is labeled X-OVER and that is how these functions are oen used, each input and output
have very exible high-pass and low-pass lters that can be congured for many applications.
To activate the lter use the parameter control to select bypass on the screen and change it to the desired lter
type. ere are 3 dierent lter alignments available, Butterworth, Bessel and Linkwitz-Riley. e lter slopes of
6 dB/Octave to 48 dB/Octave can be selected.
To Next Page
Loading...