11
Matrix
Compressor (COMP)
Polarity
e Matrix screen is only available when editing an output. is is where the inputs that drive each output are
connected. e above screen shows input "A" as the signal source for output 1. If multiple inputs are selected,
their signals are summed.
e compressor screen is only available when editing an output. e compressor parameters are: T= reshold,
R= Ratio, AT= Attack Time and RT= Release Time. e threshold is roughly equal to the limiting level in dBu.
e limit LED corresponding to the output channel will light when the threshold is exceeded. e status is also
displayed in the computer editor.
0= Normal polarity. 180= Reverse polarity.
To Next Page
Loading...