Need help?Do you have a question about the Peavey XRD 680S Plus and is the answer not in the manual?
General| Type | Powered Mixer |
|---|---|
| Channels | 6 |
| Frequency Response | 20 Hz - 20 kHz |
| Phantom Power | Yes |
| USB Interface | No |
| EQ | 3-band |
| Power Output | 680W |
Accepts low-impedance microphones or low-level sources via XLR connector.
Accepts line-level signals or high-impedance microphones via 1/4" plug.
Selects the desired digital effect from available banks.
Adjusts the time parameters for selected digital effects.
Provides 012 dB equalization at nine center frequencies.
Controls the overall volume level of the main system output.
Controls the overall monitor mix level.
Switches +48V phantom power on or off for all channels.
Turns the AC mains power for the unit on or off.
Details on fuse replacement and warnings to prevent damage.
Jacks for connecting external speaker cabinets, specifying minimum load.
Details input noise, frequency response, impedance, EQ, gain, and levels for channels.
Technical details including bandwidth, frequencies, Q, boost/cut, noise, and response.
Details input sensitivity, output power, distortion, protection, and cooling.
To Next Page
