Peavey XR 1204

Covers essential warnings and precautions for safe operation.

Details OSHA permissible noise level exposures to prevent hearing loss.

Highlights the main features and capabilities of the XR 1204 mixer.

Describes 1/4", MIC, and stereo line input connectors and their usage.

Explains PAD, POLARITY, and PHANTOM POWER functions.

Details INSERT, MIC GAIN, and EQ controls for signal shaping.

Explains controls for routing signals to monitor and auxiliary mixes.

Covers LINE LEVEL, EQ DIRECT, and stereo EQ settings.

Details stereo EQ, MID FREQUENCY, LOW EQ, and BALANCE functions.

Describes tape connectivity, levels, and the Feedback Locating System.

Explains the graphic EQs and system mode switching.

Details system mode, LED meters, and master level controls.

Explains digital reverb settings and headphone output volume.

Describes the primary output connections for L/R, Monitors, and Mono.

Details Aux Send, Reverb Mute jack, and Power Amp Inputs.

Covers speaker connections and the AC power inlet.

Provides guidance on connecting microphones, instruments, and line sources.

Explains using external amplifiers and monitor setups.

Describes connecting external effects and tape decks.

Lists impedance, gain, and level specs for Mic and Line inputs.

Details specifications for stereo line and tape inputs.

Provides impedance, output levels, and connector types for main outputs.

Details specifications for Aux Send, Headphone, and Tape outputs.

Lists gain adjustment ranges for various input types.

Details frequency response and total harmonic distortion figures.

Covers graphic equalizer parameters and amplifier specifications.

Specifies hum, noise, and crosstalk measurements.

Details equivalent input noise and unit dimensions.

Visual representation of signal levels throughout the mixer.

Block diagrams illustrating line and mic channel signal flow.

Block diagrams illustrating master section signal flow.

Essential safety guidelines for operating the equipment.

Details OSHA permissible noise level exposures.

Outlines warranty terms, coverage, and service procedures.