Owner’s Manual
Page 10
These measurements are approximate and should be measured from the top of the
pickup to the bottom of the string.
FRETBOARDS
Maple Fingerboard Care
If you bass has a maple fingerboard, it is coated with a hard polyester finish. There is
no need to apply oils or wax. To clean, simply wipe it down after each playing with a
clean, soft cloth or use a ScotchBrite pad to gently remove build-up of grime.
FRETLESS FINGERBOARDS
The coating on your fretless neck is polyester. It is 80% hard as glass. We suggest
using a nickel wound string as it is less abrasive on the finish. You will find that within
a short period of time the finish will scratch or mark. Never fear, this is normal and
will not affect the playability of the bass. With normal wear ad tear, this finish will last
To Next Page
Loading...