EasyManua.ls Logo

Pedulla MVP - Adjustments and Battery; Battery Information

Pedulla MVP
19 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Owner’s Manual
Page 4
maximum boost could result in excessive noise or distortion from overdriving the
amplifier.
Battery
Both active systems are powered by one 9V battery which is turned on when the plug
is inserted into the output jack. When the bass is not in use, disconnect the plug for
longer battery life. A 9V alkaline battery will last for 2 months of continuous use
(more like 8 months to a year in real-life use) on the TC-4. The TBIBT is rated at one
month continuous use. A weak or dying battery will result in a distorted output.
To change the battery, remove the four screws holding the backplate, and replace.
When reinstalling the backplate do not overtighten screws.
ADJUSTMENTS
Your "action", or the way your bass plays and sounds, is dependent upon the strings,
neck "bow", bridge height, pickup height, and intonation. Understanding their
interaction is important in maintaining the performance of you Pedulla instrument.