Peerless Faucet P220LF User Manual

TWO HANDLE WASHERLESS KITCHEN FAUCET
MODELS P220LF, P221LF, P225LF, P225LF-W &
P226LF
LLAVE DE FREGADEROS DOS MANIJAS SIN
ARANDELAS - MODELOS P220LF, P221LF,
P225LF, P225LF-W & P226LF
ROBINET SANS RONDELLE À DEUX MANETTES
POUR ÉVIER DE CUISINE - MODÈLES P220LF,
P221LF, P225LF, P225LF-W & P226LF
ASME A112.18.1 / CSA B125.1
Record Your Model Number Here For Future Reference
Anote Aquí Número del Modelo Comprado Para Referencia Futura
Inscrivez le numéro de modèle ici pour pouvoir le retrouver.
ASSEMBLY PARTS LIST
LISTA DE PIEZAS PARA LA INSTALACIÓN
LISTE DES PIЀCES
Description
Descripción
Description
Faucet
Llave
Robinet
1
1
2
2
NA
NA
1
1
2
2
NA
NA
1
1
2
2
1
1
1
1
2 2
1
1
1
1
2NA
1
1
Gasket
Empaque
Joint
Locknuts
Contratuercas
Écrous de Blocage
Coupling Nuts
Tuercas de Acoplamiento
Écrou de Raccordement
Spray & Hose Assembly
Ensamble de la Rociador y Manguera
Douchette et Tuyau Souple
Spray Support
Soporte del Rociador
Support
Quantity / Calidad / Quantité
You may need
Usted puede necesitar
Articles dont vous pouvez avoir besoin:
Water supply hook-ups:
(NOT PROVIDED)
Choose hook-ups for 1/2" I.P.S. connections: Ball
nose riser (3/8" O.D. copper tubing), or 1/2" I.P.S.
faucet connector.
Suministros de agua:
(NO PROPORCIONADAS)
Escoja conexiones para I.P.S. de 1/2": Tubos
montante bola-nariz (tubería de cobre de 3/8" D.E.),
o conector de llave I.P.S. de 1/2".
Raccords :
(NON FOURNIS)
Choisissez des raccords compatibles 1/2 po IPS.
Tubes-raccords à portée sphérique (tube en cuivre
3/8 po d.e.) ou raccords de robinet 1/2 po IPS.
Silicone sealant:
(NOT PROVIDED)
If sink is uneven use silicone sealant under base
of faucet.
Sellador de silicón:
(NO PROPORCIONADAS)
Si el fregaderos está desnivelado use sellador
de silicón debajo de la base del borde.
Composé D'étanchéité à la silicone :
(NON FOURNIS)
si la surface de l’évier est inégale, appliquez du
composé d’étanchéité à la silicone sous la base
du robinet.
Wrench(es):
(NOT PROVIDED)
For faucet removal/installation.
Llave(s):
(NO PROPORCIONADAS)
Para quitar/instalación de fregaderos.
Clé(s):
(NON FOURNIS)
pour pose et dépose de robinet
Sink Hole Dimensions
Dimensiones del Hoyo Fregaderos
Dimensions des orices de I’évier
1-3/8" Dia.
(34.9 mm)
8"
(20.32 cm)
1-1/8"Max. (28.6mm)
2"Max.
(50.8mm)
Estimated Time For Assembly
The estimated time to install this faucet is 45 minutes. The estimated
time to install the spray & hose assembly is 20 minutes. These
estimates do not include removing the old faucet and spray assembly.
Tiempo Estimado para Instalar
El tiempo estimado para instalar esta llave de agua es 45 minutos. El
tiempo estimado para instalar el ensamble del rociador y la manguera
es 20 minutos. Estos estimados no incluyen el tiempo que toma quitar
la llave de agua vieja y el ensamble del rociador.
Durée d’installation estimée
La durée d’installation de ce robinet est estimée à 45 minutes.
La durée d’installation estimée du renvoi mécanique est de 20
minutes. Ces estimations n’incluent pas la dépose du vieux robinet et
du vieux renvoi.
The Peerless
Installation Helpline
1-800-438-6673
www.peerlessfaucet.com
Instruction Manual Printed in China
Manual de Instrucciones Impreso en China
Manuel d’instructions Imprimé en Chine
5/12/2014 1 66502 Rev.D
P226LF P225LF-W P225LF P220LF P221LF
Do not attempt to solder 1/2” copper pipe
No intente soldar el tubo de cobre del 1/2 "
N'essayez pas la pipe de cuivre de souder 1/2 »

Peerless Faucet P220LF Specifications

General

Brand	Peerless
Model Number	P220LF
Product Type	Faucet
Material	Metal
Finish	Chrome
Flow Rate	1.2 GPM
Installation Type	Deck Mount
Handle Type	Lever
Handle Style	Lever
Mounting Type	Single Hole
Spout Height	5.5 inches
Valve Type	Ceramic Disc
ADA Compliant	Yes
Spout Reach	4.5 inches

Summary

Installation Time Estimate

Required Tools and Supplies

Water Supply Hook-ups

Details on choosing connections for 1/2" I.P.S. supply lines.

Soldering Copper Pipe Warning

Warning against attempting to solder 1/2" copper pipe for connections.

Silicone Sealant Recommendation

Use under faucet base if sink surface is uneven for a good seal.

Wrenches for Installation

Required tools for faucet removal and installation.

Sink Hole Dimensions

Care Instructions

Cleaning the Faucet

Wipe gently with a damp cloth and blot dry with a soft towel.

Warning on Cleaning Agents

Avoid specific bathroom cleaners on clear knob handles to prevent damage.

Maintenance and Troubleshooting

Shut Off Water Supplies

Essential first step before any part replacement or repair.

Replacing Parts Instructions

Follow illustrated instructions provided with repair kits for replacements.

Troubleshooting Leaks from Spout

Replace stem unit, seats, and springs if spout leaks.

Troubleshooting Leaks from Spout Cap

Replace O-rings if water leaks around the spout cap.

Troubleshooting Spray Attachment

Check diverter assembly for proper spray function; clean or replace.

Troubleshooting Low Water Flow

Clean aerator or seats and springs for low flow issues.

Faucet Parts Identification

Knob Handles

Identifies knob handles with buttons and screws for hot & cold.

Spout Cap, Plug & O-Ring

Identifies the spout cap, plug, and O-ring assembly.

Aerator

Part number and identification for the aerator.

Diverter Assembly

Identifies the diverter assembly and related O-rings.

Stem Unit Assembly

Details stem unit, seat, spring, bonnet nut, and washer.

Spray Hose Assembly

Identifies spray, hose assembly, and spray support.

Locknuts

Identifies locknuts for securing the faucet.

Coupling Nuts

Identifies coupling nuts, noting they are not supplied in some models.

Limited Lifetime Warranty

Warranty Coverage

Covers defects in material and workmanship for original consumer purchaser.

Exclusions from Warranty

Excludes labor charges, damage from misuse, and non-genuine parts.

Warranty Claim Requirements

Requires proof of purchase for all warranty claims.

Commercial Use Warranty

Five-year limited warranty for industrial, commercial, and business usage.