Do you have a question about the Pegasus 873-5104 and is the answer not in the manual?
Connect hot/cold supply lines, shower/tub outlet pipes, and elbows to the valve body.
Flush lines, check for leaks, and remove the handle after flushing.
Install shower arm (B) through flange (A) and connect tub spout outlet pipe to elbow.
Thread tub spout (I) onto connection until flush with wall, then tighten.
Test water flow through tub spout and shower arm, then check for leaks and remove handle.
Place handle and inverter, then turn valve stem counterclockwise to set max water temp.
| Handle Type | Lever |
|---|---|
| Number of Handles | 2 |
| Flow Rate | 1.2 GPM |
| Material | Brass |
| Valve Type | Ceramic Disc |
| Features | WaterSense Certified |
| Mounting Type | Deck Mounted |
Loading...