To Next PageTo Next Page
Need help?Do you have a question about the Pegasus 873W-5004 and is the answer not in the manual?
Pegasus products are warranted to the original consumer purchaser to be free of defects in materials or workmanship.
Ensure all parts are present before installation by comparing with Package Contents and Hardware Included lists.
Tools needed for installation include wrenches, screwdrivers, goggles, measuring tape, and thread sealant tape.
Details of included hardware, specifically Escutcheon screw (AA).
Diagram and list of all included parts, including shower arm, head, valve body, handle, and spout.
Safety precautions and wall preparation for installation, including turning off water and checking hole dimensions.
Procedure to remove the plaster guard (K) using screws (J) as part of the installation.
Connecting water supply lines, tub outlet pipe, and shower outlet pipe to the valve body (D) with thread sealant tape.
Flushing water outlets by turning on the handle (F) and checking for any leaks after installation.
Securing the plaster guard (K) onto the valve body (D) using the provided screws (J).
Installing the shower arm (B) and connecting the tub spout outlet pipe with thread sealant tape and a strap wrench.
Attaching the tub spout (I) by threading it onto the connection and tightening with a strap wrench.
Removing the plastic cap from the valve body (D) by twisting it clockwise before installing the escutcheon (E).
Testing the faucet functionality, activating the shower, and checking for leaks after installation.
Mounting the escutcheon (E) with screws (AA) and attaching the handle (F) with set screw (G).
Attaching the shower head (C) to the shower arm (B) and tightening it with a strap wrench.
Steps to remove the handle (F), escutcheon (E), and inverter (3) for temperature adjustment.
Removing the red limit stop ring (1) from the cartridge assembly (2) as part of temperature adjustment.
Adjusting the maximum water temperature by placing the handle (F) and inverter (1) and turning the valve stem (2).
Verifying the water temperature for comfort, typically between 90°F-100°F, and turning off the stem.
Reinstalling the red limit stop ring (1) and adjusting its position to limit stem movement.
Reassembling the inverter (1), sleeve (3), escutcheon (E), and handle (F) onto the valve body (D).
Maintaining the faucet's finish using non-abrasive wax and cleaners, and rinsing immediately after use.
List of replacement parts with their corresponding part numbers for ordering and maintenance.
General| Brand | Pegasus |
|---|---|
| Model | 873W-5004 |
| Category | Bathroom Fixtures |
| Language | English |
