Pegasus PFH-620 - Front Panel Overview; Back Panel Overview; SW1 DIP Switch Settings; Timer Table Configuration

— FRONT PANEL：
— BACK :
W-04-PFH9210-620-1-W/E
LED
：
Red
（Power On）
LED
：
Green
（Legal Access）
163mm
270mm
270mm
Screw hole
(#8
＊
1
-
1/2)
Screw hole
(#8
＊
1
-
3/4)
Screw hole
Dig out hole
Dig out hole
41.5mm
? PACKAGE CONTENTS
DESCRIPTION
Q’TY
Screw
Screw (M5X20)
Screw nut
Washer
Switching Power supply 15VDC
Sticker
Manual
2pcs
2pcs
2pcs
2pcs
1pc
2pcs
1pc
? Timer Table:
4 5 6
Stop
Time
OFF OFF OFF 0.5s
ON OFF OFF 1s
OFF ON OFF 2s
ON ON OFF 3s
OFF OFF ON 5s
ON OFF ON 7s
OFF ON ON 10s
ON ON ON 18s
Default Value
LED
：
Amber
(Standby)
● SW1 definition
SW Function ON OFF
SW#1 Loop sensor check Check Entry/Exit sensor Not check Entry/Exit sensor
SW#2 Operation mode Time mode Automatic mode
SW#3 Double reading check NO YES
SW#4~#6 Time selection Refer to timer table
● Example A: Automatic mode ( “? ” : means don’t care ) Send signal one time only
1 2 3 4 5 6 Function
ON OFF ON
? ? ?
● Reading the card only one time
● Example B: Timer mode (Periodically send signal by timer)
1 2 3 4 5 6 Function
ON ON ON OFF OFF ON
● Periodically send signal every 5
seconds
Screw hole
for bracket
Optional accessory: the bracket for PFH-9210 series: (Model no. : PGV-BRACKET/L205)