Need help?Do you have a question about the Pegasus PFH-620 and is the answer not in the manual?
Illustrates a typical setup connecting readers, controllers, and PCs for access control systems.
Overview of the PFH-9210-620-1/W reader's secure design, reliability, and performance.
Detailed technical specifications for the PFH-9210-620-1/W reader, including dimensions and operating conditions.
Step-by-step instructions for installing the reader, covering mounting location and power supply.
Details on pin assignments, wire colors, and functions for reader connectivity.
Description of the reader's front panel, including LED indicators (Power, Access, Standby) and display.
Description of the reader's back panel, including mounting holes and DIP switch locations.
Explanation of DIP switch functions for configuring operation modes like loop sensor check and time mode.
Table defining time settings for reader operation modes, such as stop time for signals.
Guidance on installing readers for parking control systems to avoid frequency interference.
Explains FCC compliance for the device and provides guidelines to minimize harmful interference.
Advises on maintaining compliance, avoiding unauthorized modifications, and using shielded cables.
Shows wiring details for the PP-2752 controller's Wiegand port and 9-pin connector.
Details the 7-pin wire configuration for the PFH-9210-620-1/W receiver, including power and data pins.
To Next Page
General