Pegasus WT600 Series - User Manual

9A2833E
Thank you for purchasing Pegasus' labor saving device.
Study this manual very carefully before beginning any of
the procedures and then use the device correctly and
safely.
Keep this manual in a convenient place for quick refer-
ence when needed.
Read also the instruction manual supplied with the motor.
Thread trimmer
INSTRUCTIONS
UT
Device
Models: W(T)200 Series
W(T)600 Series

Summary

Introduction and Safety Information

2. Indications of Dangers, Warnings, and Cautions

Explains hazard indications and signal words to prevent accidents.

Safety Precautions and Operating Circumstances

Procedural Notes and Installation Preparation

Safety Measures for Maintenance and Operation

Covers safety during maintenance, pre-operation checks, and user training.

Operational and Maintenance Safety

Grounding and Pre-Operation Safety

Covers grounding procedures and pre-operation checks.

Work and Maintenance Precautions

Details safety precautions during work and maintenance.

Maintenance, Check, and Repair Guidelines

Provides guidelines for device maintenance, checks, and repairs.

Installing the Electric Presser Foot Lift

Installing the Pneumatic Presser Foot Lift

Installing the Filter Regulator and Solenoid Valve

Adjusting the Air Pressure

Threading Diagram for W600

Threading Diagram for W200

Sewing Operation

Adjusting the Driving System

Adjusting the Solenoid Assembly for Electric UT

Steps to adjust the solenoid assembly for electric UT device operation.

Adjusting the Air Cylinder for Pneumatic UT Device

Steps to adjust the air cylinder for pneumatic UT device operation.

Lower Knife Adjustment

Positioning the Lower Knife Left to Right

Adjusts the horizontal position of the lower knife.

Positioning the Lower Knife Front to Back

Knife Holder and Lower Knife Positioning

Positioning the Knife Holder

Positioning the Lower Knife Up and Down

Lower Knife Travel and Collar Positioning

Positioning the Lower Knife at Extreme Left Travel

Upper Knife and Thread Holder Adjustments

Upper Knife Adjustment

Lower Knife Clamp Spring Adjustment

Under Thread Holder Adjustment

Knife Stopper and Holder Adjustments

Upper Knife Stopper Adjustment

Knife Holder Guide Clamp Spring Adjustment

To Position the Knives

Adjusting the Electric Needle Thread Wiper

Adjusting the Pneumatic Needle Thread Wiper (Air Wiper)

Adjusting the Amount of Air from the Air Wiper

Adjusting the Pneumatic Top Cover Thread Trimmer

Adjusting the Thread Releaser

Adjusting the Operation Detector

Pegasus WT600 Series Specifications

General

Brand	Pegasus
Model	WT600 Series
Category	Sewing Machine Accessories
Language	English