Pego EASYSTEAM User Manual

Page 40 Rev. 01-16
MANUALE D’USO – USER MANUAL
Master/Slave address:
Setting of parameters MS and Ad of the various units in this configuration, is permanent and
follows the rule below:
Parameters configuration in Master unit:
Ad = 0 Control Master Address
MS= 2 with Control Master + Slave1
3 with Control Master + Slave1+Slave2
4 with Control Master + Slave1+Slave2+Slave3
5 with Control Master + Slave1+Slave2+Slave3+Slave4
6 with Control Master + Slave1+Slave2+Slave3+Slave4+Slave5
Parameters configuration in Slave1 unit:
Ad = 1 (Ad Master +1)
MS= 1 slave
Parameters configuration in Slave2 unit:
Ad = 2 (Ad Master +2)
MS= 1 slave
Parameters configuration in Slave3 unit:
Ad = 3 (Ad Master +3)
MS= 1 slave
Parameters configuration in Slave4 unit:
Ad = 4 (Ad Master +4)
MS= 1 slave
Parameters configuration in Slave5 unit:
Ad = 5 (Ad Master +5)
MS= 1 slave
MASTER
MS=1
Ad=3
MS=1
Ad=2
MS=1
Ad=1
Humidity
sensor
MS=6
Ad=0
SLAVE-1
SLAVE-2
SLAVE-3
RS-485
MS=1
Ad=4
SLAVE-4
MS=1
Ad=5
SLAVE-5

Pego EASYSTEAM Specifications

General

Brand	Pego
Model	EASYSTEAM
Category	Humidifier
Language	English