EasyManua.ls Logo

Pego EASYSTEAM - User Manual

Pego EASYSTEAM
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
REV. 01/04
Use and maintenance manual
READ AND KEEP
REV. 01-16
ENG
STEAM

Other manuals for Pego EASYSTEAM

Question and Answer IconNeed help?

Do you have a question about the Pego EASYSTEAM and is the answer not in the manual?

Pego EASYSTEAM Specifications

General IconGeneral
Humidification Capacity300 ml/h
ControlElectronic
Coverage Area30 m²
Noise Level≤35 dB
TypeUltrasonic
Power Supply220–240 V

Summary

Introduction to EASYSTEAM Humidifiers

Generality

Overview of the Pego EASYSTEAM sunk-electrode humidifiers, their features, and applications.

Functioning Principle

Explanation of how the sunk-electrode humidifiers produce steam using water conductivity and electrodes.

Technical Data

Detailed technical specifications and working conditions for ES and OEM series humidifiers.

Overall Dimensions

Diagrams and measurements for ES and OEM series humidifier units and electronics kits.

Installation Procedures

Main Installation Warnings

Critical safety and installation guidelines for personnel and appliance placement.

Installing ES Series Humidifier

Step-by-step guide for mounting and preparing the ES series humidifier for operation.

Sensors and Control Signals Connections

Details on connecting various probes and control signals for different operating modes.

Electrical Layouts

Wiring diagrams for ES and OEM series models, illustrating component connections.

Installing OEM Series Humidifier

Specific instructions for the installation of the OEM series humidifier unit.

Programming and Configuration

Nano EasySTEAM Display Description

Overview of the display interface, icons, and keys for humidifier control.

1 st Level Programming

Guide to adjusting primary parameters like steam output percentage and proportional band.

2 nd Level Programming

Advanced parameter settings for specific humidifier functions and fine-tuning.

Master;Slave Configuration

Single Humidifier Configuration

Setting the humidifier to operate autonomously as a single unit.

Master;Slave Humidifiers Configuration

Instructions for configuring multiple humidifiers to work in a coordinated master-slave network.

Humidifier Ignition

Commissioning

Steps for initial setup, checks, and powering up the humidifier.

Steam Output

Procedure for setting humidity levels and initiating steam production.

Diagnostics and Alarms

Alarm Codes and Descriptions

List of error codes, their causes, and recommended corrective actions.

Maintenance Procedures

General and Safety Standards

Essential safety precautions and procedures for carrying out maintenance.

Maintenance Intervals

Recommended schedule for routine maintenance tasks and checks.

Replacing the Cylinder

Detailed instructions for safely removing and installing a new cylinder.

Cleaning the Cylinder

Procedure for cleaning the cylinder to remove scaling and deposits.

Steam Distribution

Example of Distribution in Duct

Guidance on installing steam distributors within ventilation ducts for optimal airflow.

Choosing a Steam Distributor

Table of available steam distributor models with their specifications.

Condense Recovery

Methods for managing and recovering condense generated by the steam distributor.

Attachments and Documentation

CE Declaration of Conformity

Statement confirming the product's compliance with relevant European directives.

ES Series Spare Parts List

List of available spare parts for the ES series humidifiers with reference codes.

OEM Series Spare Parts List

List of available spare parts for the OEM series humidifiers with reference codes.

Related product manuals