GENERALITY
The family of Pego EASYSTEAM sunk-electrode humidifiers is the latest conception on the
humidifiers market and can be considered the most complete for use type and easy maintenance.
The line includes humidifiers with 3KG/h and 6KG/h capacity with single-phase electric power
supply, 6KG/h, 12KG/h, 24KG/h, 48KG/h with three-phase+neutral electric power supply; all able
to work in ON/OFF mode, proportional mode with integrated humidostat and 4-20mA or 0-10V
probe, proportional mode with outdoor 0-10V signal, in ON/OFF mode from integrated thermostat.
The EASYSTEAM humidifiers are provided with a microprocessor software enabling the widest
programming for a fully customised use and a completely automatic functioning.
In fact, it is possible to set the maximum steam supply capacity, intermediate capacity values in
percentage, discharge frequency for disturbance, water discharge for non-use.
The EASYSTEAM line is also provided with a display for real time viewing of the humidity in the
premises to be treated; the current absorbed by the electrodes, the hours of work, various alarms,
water charging and discharging as well as all easily settable programming parameters.
An acoustic alarm (buzzer) is present in the EASYSTEAM humidifiers that warns the user of any
anomalies; the internal software is able to evaluate the seriousness of the anomaly, blocking the
machine or continuing the steam supply.
The strength of the EASYSTEAM line is the simplicity with which the cylinder is replaced when
normal wear makes it necessary.
To Next Page
Loading...
Need help?
General
