PELI 7070R User Manual

7070R
INSTRUCTIONS MANUAL
WARNING: Before disassembling any part of the 7070R
LED Torch, ensure that the Torch has not been operating for
ve(5)minutes.Duringoperation,theLEDmodulecanbecome
extremelyhotandmaycauseinjuryiftouched.
Torch Operation
The 7070R LED is a high performance Torch for use by
professionals.ThisTorchcomesequippedwithdualswitchesand
includes a high output pre-focused LED lamp that emits a strong
lightbeamofwhitelight.Thereisnoneedtofocusthe7070RLED.
DO NOT SHINE THIS Torch DIRECTLY INTO ANY PERSON’S
EYES: THIS MAY RESULT IN INJURY.
Your 7070R battery pack comes to you partially charged and needs
tobefullychargedpriortouse(seecharginginstructionsbelow).
Momentary Activation
Partiallydepresseitherswitchformomentaryoperation.
Constant Activation – Fullydepresseitherswitch(click),tolockin
theselectedmode.
Bluetooth App Programming
Downloadthe“PelicanTorch”appfromeithertheApple
orAndroidstores.
1.ActivatethePelicanTorchappfrom
yoursmartphone.See Image #1
2.TurnontheTorch
3.Select“ScanPelicanProducts”
from the menu on your smartphone
andselectyour7070Rviathe
identiedserialnumber.
YourTorchwillnowshowconnected.  
1
4.Onceconnectedyoucanselectupto
5di󰀨erentmodesandthesequenceofthosemodesasnumberedintheapp.
Eachselectedmodeallowsforvariedlightoutputand/orvariedstrobespeed.
See Image #2
Manual Programming
2
To select a program using the
manual input, select one of the
vepre-setprogramoptions.
Note, the 7070R is
pre-programmedwithProgram#1.
To change program, partially
depresseitherswitch(momentary
press,donotclick)thenumber
of times as indicated in the table
belowandholdthelastpressuntil
you see the coordinating number
ofconrmationashes.
Eachpressneedstobewithin.5secondsofeachother.
Momentary
presses
Conrmation
ashes
Program1(default) High>Strobe>Medium>Low 8
*
Program 2 HighOnly 10
**
Program 3 High>Medium>Low> 12
***
Program 4 Low>Medium>High> 14
****
Program5 High>Low> 16
*****
Mode Selection
Partiallydepresseitherswitchwithin.5secondincrementstoselectthedesiredmode.
Eachpresswithprovidethemodeinitsprogrammedsequence.Fullydepresstheswitch
tolockinthedesiredmode.
Light O󰀨
3
Fullydepresseitherswitch(click),toturno󰀨
thelightfromanyactivatedmode.
Charging:
1.AttachtheUSBChargeCordtothe
bottomoftheChargerBase.See Image #3
Manual 7070R
EN

PELI 7070R Specifications

General

Brand	PELI
Model	7070R
Category	Flashlight
Language	English

Summary

Torch Operation and Modes

Torch Operation Basics

Dual switches for momentary or constant activation of the high-output LED.

Bluetooth App Customization

Connect via app to select up to 5 modes and sequences.

Manual Mode Programming

Select one of five pre-set program options using manual input.

Mode Selection Method

Partially depress switch within 0.5s increments to cycle through modes.

Light Control and Charging

Turning the Torch Off

Fully depress either switch (click) to deactivate the light.

Initiating Charging

Attach the USB Charge Cord to the bottom of the Charger Base.

Charging and Battery Management

Connecting Charger to Power

Plug USB end into power outlet; charge status LED indicates connection.

Aligning Light for Wireless Charging

Slide light into base; LED indicates charging status (red/green).

Charger Mounting Options

Mount charger base to a surface using screws.

Battery Level Monitoring

Indicator LED in switch boot shows battery status (Green, Yellow, Red).

Replacing the Battery

Unscrew shroud, pull module to replace battery or use CR123.

O-ring and Seal Maintenance

Check, clean, and lubricate O-rings and lens lip surfaces.

Battery Safety Information

Rechargeable Battery Precautions

Use approved packs, charge in non-hazardous locations, observe temperature limits.

General Battery Warnings

Handle properly to avoid injury; use approved packs, avoid damaged/counterfeit batteries.