What to do if the water pressure is slowing in my Pelican Water Technologies PC1354?
If the system's water pressure is slowing, it may be time to change the Sediment Filter. It is recommended that the Sediment Filter be replaced every 6-9 months, depending on the amount of sediment present in the water supply. Check the Sediment Filter and replace it if necessary.
How to fix water leaking at the top of the tank around the head of my Pelican Water Technologies Water Dispenser?
If you notice water leaking at the top of the tank around the head, you may need to turn the head to tighten it. The tank head is pre-installed hand-tight, so do not overtighten the head; just turn it snug.
General| Brand | Pelican Water Technologies |
|---|---|
| Model | PC1354 |
| Category | Water Dispenser |
| Language | English |
Crucial details and warnings before installation and operation.
Instructions for assembling the sediment filter and housing.
Steps for mounting the pre-filter system and connecting water supply.
Recommendations for sediment filter replacement frequency.
Step-by-step instructions for replacing the sediment filter.
Details warranty coverage for tanks, valves, and housings.
Specifies warranty for retention and mineral tanks.
Outlines warranty exclusions and customer obligations.
To Next Page
